Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE REAR PACKAGE TRAY TRIM PANEL ASSEMBLY (with Rear Package Tray Trim)
Click here![]()
2. REMOVE SILL COVER ASSEMBLY (with Sill Cover)
Click here![]()
3. REMOVE BACK DOOR UPPER FINISH PANEL ASSEMBLY
(a) Release the claws and clips to remove the back door upper garnish panel assembly. |
![]() |
4. REMOVE LEFT BACK DOOR SIDE GARNISH
(a) Release the claws and clips to remove the LH back door side garnish. |
![]() |
5. REMOVE RIGHT BACK DOOR SIDE GARNISH
HINT:
Perform the same procedure as for the left side.
6. REMOVE REAR PARCEL SHELF GARNISH HOOK
HINT:
Repeat the same procedure for the right side and the left side.
(a) Remove the screw. |
![]() |
(b) Remove the rear parcel shelf garnish hook. |
![]() |
7. REMOVE BACK DOOR TRIM PANEL ASSEMBLY
(a) Release the clips to remove the back door trim panel assembly. |
![]() |
8. REMOVE DOOR CLOSING HANDLE
(a) Using a moulding remover D, release the claws to remove the door closing handle. |
![]() |
9. REMOVE BACK DOOR ACCESS HOLE COVER NO. 1
(a) Release the claws to remove the rear door access hole cover No. 1. |
![]() |
10. REMOVE BACK DOOR ACCESS HOLE COVER NO. 2
HINT:
Perform the same procedure as for the back door access hole cover No. 1.
11. REMOVE BACK DOOR ACCESS HOLE COVER NO. 3
(a) Release the claws to remove the No. 3 back door service hole cover. |
![]() |
12. REMOVE LEFT BACK DOOR SERVICE HOLE COVER
(a) Release the claws to remove the left back door service hole cover. |
![]() |
13. REMOVE RIGHT BACK DOOR SERVICE HOLE COVER
HINT:
Perform the same procedure as for the left side.
14. REMOVE BACK DOOR LOCK COVER
(a) Release the claws.
![]() |
Double-sided adhesive tape |
(b) Remove the double-sided tape and the back door lock cover.
NOTICE:
Remove the remaining double-sided tape from the back door.
15. REMOVE BACK DOOR LOCK ASSEMBLY
Click here![]()
16. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
Click here![]()
17. REMOVE REAR WIPER MOTOR ASSEMBLY
Click here![]()
18. REMOVE REAR WIPER MOTOR GROMMET
Click here![]()
19. REMOVE BACK DOOR LOWER STOPPER
(a) Remove the bolt. |
![]() |
(b) Release the guide to remove the back door lower stopper.
HINT:
Repeat the same procedure for the right side and the left side.
20. REMOVE REAR SPOILER ASSEMBLY
Click here![]()
21. REMOVE REAR WASHER NOZZLE
Click here![]()
22. REMOVE BACK DOOR OUTSIDE TRIM
Click here![]()
23. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY
Click here![]()
24. REMOVE LICENSE PLATE LIGHT ASSEMBLY
Click here![]()
25. REMOVE REAR VIEW CAMERA ASSEMBLY (with Rear View Monitor System)
Click here![]()
26. REMOVE BACK DOOR TRIM RETAINER No. 2 (without Rear View Monitor System)
(a) Release the claws to remove the No. 2 back door trim retainer. |
![]() |
27. REMOVE BACK DOOR PANEL CUSHION
(a) Release the claws to remove the 2 rear door panel pads. |
![]() |
28. REMOVE BACK DOOR PANEL PROTECTOR No. 2
(a) Disengage the clips.
![]() |
Double-sided adhesive tape |
(b) Remove the double-sided tape and the No. 2 back door panel protector.
NOTICE:
Remove the remaining double-sided tape from the back door.
29. REMOVE BACK DOOR PANEL PROTECTOR No. 1
HINT:
Use the same procedure for the No. 1 back door panel protector.
30. REMOVE LEFT REAR COMBINATION LAMP ASSEMBLY
Click here![]()
31. REMOVE RIGHT REAR COMBINATION LAMP ASSEMBLY
HINT:
Perform the same procedure as for the left side.
32. REMOVE REAR COMBINATION LAMP GARNISH
Click here![]()
33. REMOVE BACK DOOR MODEL DESIGNATION PLATE No. 1 (with brand mark)
Click here![]()
34. REMOVE BACK DOOR MODEL DESIGNATION PLATE No. 2
Click here![]()
35. REMOVE BACK DOOR EMBLEM No. 1
Click here![]()









.png)


