Exterior Panels / Trim
Removal
In this manual: Exterior Panels / Trim
~1min read
REMOVAL
PRECAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side as for the LH side.
- The procedures described below are for the left side.
PROCEDURE
1. REMOVE REAR DOOR OUTER MOULDING
(a) Apply protective tape around the rear door outer moulding.
![]() |
Protective tape |
(b) Remove the hole cover. |
![]() |
(c) Remove the nut and gasket. |
![]() |
(d) Release the clips to remove the rear door outer moulding, as shown in the illustration.
![]() |
Remove in this direction |
Was this page helpful?
.png)


.png)