Exterior Panels / Trim
Installation
In this manual: Exterior Panels / Trim
~1min read
INSTALLATION
PRECAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side as for the LH side.
- The procedures described below are for the left side.
PROCEDURE
1. INSTALL REAR DOOR OUTSIDE MOULDING
(a) Remove the protective paper from the surface of the outside moulding retainer.
HINT:
After removing the release paper, do not let the adhesive surface come into contact with foreign matter.
(b) Engage the clips to install the rear door outside moulding, as shown in the illustration.
![]() |
Install in this direction |
(c) Remove the masking tape.
(d) Install the seal and nut.
(e) Install the hole cover.
Was this page helpful?
.png)