Removal
REMOVAL
PROCEDURE
1. REMOVE LH REAR BUMPER SIDE SEAL
(a) Remove the 7 clips and the LH rear bumper side seal. |
![]() |
2. REMOVE RH REAR BUMPER SIDE SEAL
HINT:
Perform the same procedure as for the left side.
3. DETACH LH QUARTER WINDOW OUTER MOULDING
(a) Apply protective tape around the LH quarter window outer moulding.
![]() |
Protective tape |
(b) Remove the 2 screws.
(c) Release the clips by pressing the area indicated by the arrow in the illustration with your finger.
![]() |
Place hands here |
![]() |
Remove in this direction |
NOTICE:
To avoid damaging the claws, do not pull the LH quarter window outer moulding with excessive force.
(d) Release the clip to detach the LH quarter window outer moulding from the rear bumper assembly.
4. DETACH RH QUARTER WINDOW OUTER MOULDING
HINT:
Perform the same procedure as for the left side.
5. REMOVE REAR BUMPER ASSEMBLY
(a) Apply protective tape around the rear bumper assembly.
![]() |
Protective tape |
HINT:
Repeat the same procedure for the right side and the left side.
(b) Remove the 6 clips. |
![]() |
(c) Using a screwdriver with its tip wrapped in protective tape, release the claws to open the LH rear bumper upper cover. HINT: Repeat the same procedure for the right side and the left side. |
|
(d) Remove the 2 bolts. |
![]() |
(e) Release the claws, as shown in the illustration.
![]() |
Remove in this direction |
HINT:
Repeat the same procedure for the right side and the left side.
(f) Release the claws to remove the rear bumper assembly, as shown in the illustration.
![]() |
Remove in this direction |

.png)
.png)
.png)


