Exterior Panels / Trim

Installation

~1min read

INSTALLATION

PROCEDURE

1. INSTALL REAR BUMPER ASSEMBLY

(a) Engage the claws as shown in the illustration.

Install in this direction

(b) Engage the claws to install the rear bumper assembly, as shown in the illustration.

HINT:

Repeat the same procedure for the right side and the left side.

Install in this direction

(c) Install the 2 bolts.

(d) Engage the hook.

(e) Engage the claws to install the rear bumper plate No. 1.

HINT:

Repeat the same procedure for the right side and the left side.

(f) Install the 6 clips.

(g) Remove the protective tape.

2. INSTALL LH QUARTER WINDOW OUTER MOULDING

(a) Engage the claws and clips to install the LH quarter window outer moulding.

Install in this direction

(b) Reinstall the 2 screws.

(c) Remove the masking tape.

3. INSTALL RH QUARTER WINDOW OUTER MOULDING

HINT:

Perform the same procedure as for the left side.

4. INSTALL LH REAR BUMPER SIDE SEAL

(a) Install the LH rear bumper side seal with the 7 clips.

5. INSTALL RH REAR BUMPER SIDE SEAL

HINT:

Perform the same procedure as for the left side.