Removal
REMOVAL
PROCEDURE
1. RECOVER REFRIGERANT FROM REFRIGERANT SYSTEM (for HFO-1234yf (R1234yf))
Click here![]()
2. REMOVE ENGINE UNDER COVER NO. 1
Click here![]()
3. REMOVE FAN AND GENERATOR V BELT
Click here![]()
4. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
(a) Disconnect the connector. |
![]() |
(b) Remove the bolt to disconnect the discharge hose sub-assembly from the compressor with pulley assembly.
(c) Remove the O-ring from the discharge hose sub-assembly.
NOTICE:
Using vinyl tape, carefully seal the openings of the disconnected parts to prevent moisture or foreign matter from entering the system.
5. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
(a) Remove the bolt to disconnect the suction hose sub-assembly from the compressor with pulley assembly. |
![]() |
(b) Remove the O-ring from the suction hose sub-assembly.
NOTICE:
Using vinyl tape, carefully seal the openings of the disconnected parts to prevent moisture or foreign matter from entering the system.
6. REMOVE COMPRESSOR WITH PULLEY ASSEMBLY
(a) Remove the 2 bolts and 2 nuts. |
![]() |
(b) Using a "TORX" E8 socket wrench, remove the 2 stud bolts and the compressor with pulley assembly. HINT: Remove the compressor with pulley assembly from the vehicle, with the stud bolts remaining in the compressor with pulley assembly. |
![]() |



