Heater / Air Conditioning

Removal

~1min read

REMOVAL

PROCEDURE

1. RECOVER REFRIGERANT FROM REFRIGERANT SYSTEM (for HFC-134a (R134a))

Click here

2. RECOVER REFRIGERANT FROM REFRIGERANT SYSTEM (for HFO-1234yf (R1234yf))

Click here

3. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY NO. 1

Click here

4. REMOVE FAN AND GENERATOR V BELT

Click here

5. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

(a) Disconnect the connector.

(b) Remove the bolt to disconnect the discharge hose sub-assembly from the compressor with pulley assembly.

(c) Remove the O-ring from the discharge hose sub-assembly.

NOTICE:

Using vinyl tape, carefully seal the openings of the disconnected parts to prevent moisture or foreign matter from entering the system.

6. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

(a) Remove the bolt to disconnect the suction hose sub-assembly from the compressor with pulley assembly.

(b) Remove the O-ring from the suction hose sub-assembly.

NOTICE:

Using vinyl tape, carefully seal the openings of the disconnected parts to prevent moisture or foreign matter from entering the system.

7. REMOVE COMPRESSOR WITH PULLEY ASSEMBLY

(a) Remove the 2 bolts and 2 nuts.

(b) Using a "TORX" E8 socket wrench, remove the 2 stud bolts and the compressor with pulley assembly.

HINT:

Remove the compressor with pulley assembly from the vehicle, with the stud bolts remaining in the compressor with pulley assembly.