Doors / Back Door
Disposal
In this manual: Doors / Back Door
~1min read
DISPOSAL
PROCEDURE
1. DEPRESSURIZE BACK DOOR STAY ASSEMBLY
(a) Fully extend the back door stay assembly.
(b) Horizontally clamp the back door stay assembly in a vise with the piston rod extended.
(c) Wearing safety glasses, gradually cut the shaded area between "A" and "B" as shown in the illustration using a hacksaw, to slowly release the gas inside.
Specification:
Area | Measurement |
|---|---|
A - B |
53.5 mm (2.11 in.) |
CAUTION:
Always use appropriate safety equipment and proceed carefully when drilling, as metal particles may be ejected.
HINT:
The gas is colorless, odorless and harmless.
Was this page helpful?