Toyota RAV4 Quiz
2Az-fe engine mechanical

Definition of terms

In this manual: 2Az-fe engine mechanical
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
~1min read
Terms Definition
Monitor description Description of what ecm monitors and how detects malfunctions (monitoring purpose and details).
Related dtcs Group of diagnostic trouble codes that are output by ecm based on same malfunction detection logic.
Typical enabling condition Preconditions that allow ecm to detect malfunctions.

With all preconditions satisfied, ecm sets dtc when monitored value(s) exceeds malfunction threshold(s). Sequence of operation Order of monitor priority, applied if multiple sensors and components involved in single malfunction detection process.

Each sensor and component monitored in turn, when previous detection operation completed. Required sensor/components Sensors and components used by ecm to detect each malfunction. Frequency of operation Number of times ecm checks for each malfunction during each driving cycle.

"Once per driving cycle" means ecm only performs checks for that malfunction once during single driving cycle.

"Continuous" means ecm performs checks for that malfunction whenever enabling conditions met. Duration Minimum time for which ecm must detect continuous deviation in monitored value(s) in order to set dtc. Timing begins when typical enabling conditions met. Malfunction thresholds Value, beyond which, ecm determines malfunctions exist and sets dtcs. Mil operation Timing of mil illumination after malfunction detected.

"Immediate" means ecm illuminates mil as soon as malfunction detected.

"2 Driving cycle" means ecm illuminates mil if same malfunction detected second time during next sequential driving cycle.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.