Toyota RAV4 Quiz
Suspension

Inspection

In this manual: Suspension
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
2steps
~12min
1/5difficulty
Done 0 of 2
  1. Inspect rear stabilizer link assembly lh
Toyota RAV4. Inspect rear stabilizer link assembly lh

  1. As shown in the illustration, move the ball joint stud back and forth 5 times before installing the nut.
  2. Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the fifth turn.
Turning torque: 0.05 To 1.96 N*m, (0.5 To 20 kgf*cm, 0.4 To 17 in.*Lbf) or less
  1. Check for any cracks and grease leaks on the ball joint dust cover.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.