PKSB (Parking Support Brake)

The Parking Support Brake system consists of the following functions that operate when driving at a low speed or backing up, such as when parking. When the system determines that the possibility of a collision with a detected object is high, a warning operates to urge the driver to take evasive action. If the system determines that the possibility of a collision with a detected object is extremely high, the brakes are automatically applied to help avoid the collision or help reduce the impact of the collision.

PKSB (Parking Support Brake) system

WARNING

■Cautions regarding the use of the system

Do not overly rely on the system, as doing so may lead to an accident.

Always drive while checking the safety of the surroundings of the vehicle.

Depending on the vehicle and road conditions, weather, etc., the system may not operate.

The detection capabilities of sensors and radars are limited.

Always drive while checking the safety of the surroundings of the vehicle.

• The driver is solely responsible for safe driving. Always drive carefully, taking care to observe your surroundings. The Parking Support Brake system is designed to provide support to lessen the severity of collisions.

  However, it may not operate in some situations.

• The Parking Support Brake system is not designed to stop the vehicle completely. Additionally, even if the system has stopped the vehicle, it is necessary to depress the brake pedal immediately as brake control will be canceled after approximately 2 seconds.
• It is extremely dangerous to check the system operations by intentionally driving the vehicle into the direction of a wall, etc. Never attempt such actions.

■When to disable the Parking Support Brake

In the following situations, disable the Parking Support Brake as the system may operate even though there is no possibility of a collision.

• When inspecting the vehicle using a chassis roller, chassis dynamo or free roller.
• When loading the vehicle onto a boat, truck or other transport vessel.
• If the suspension has been modified or tires of a size other than specified are installed.
• If the front of the vehicle is raised or lowered due to the carried load.
• When equipment that may obstruct a sensor is installed, such as a towing eyelet, bumper protector (an additional trim strip, etc.), bicycle carrier, or snow plow.
• When using automatic car washing devices.
• If the vehicle cannot be driven in a stable manner, such as when the vehicle has been in an accident or is malfunctioning.
• When the vehicle is driven in a sporty manner or off-road.
• When the tires are not properly inflated.
• When the tires are very worn.
• When tire chains, a compact spare tire or an emergency tire puncture repair kit are used.
• When your vehicle is towing a trailer or during emergency towing.

NOTICE

■If "PKSB Unavailable" is displayed on the multi-information display and the PKSB

OFF indicator is flashing If this message is displayed immediately after the engine switch is changed to ON, operate the vehicle carefully, paying attention to your surroundings. It may be necessary to drive the vehicle for a certain amount of time before the system returns to normal.

(If the system does not return to normal after driving for a while, clean the sensors and their surrounding area on the bumpers.)