Toyota Sienna Quiz
Audio / visual

Audio terminal

In this manual: Audio / visual
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
4steps
~24min
2/5difficulty
Done 0 of 4

COMPONENTS

COMPONENTS

REMOVAL

1. REMOVE INSTRUMENT CLUSTER CENTER NO. 2 FINISH PANEL

REMOVE INSTRUMENT CLUSTER CENTER NO. 2 FINISH PANEL
  1. Using a moulding remover, disengage the 3 clips.
  2. Disconnect the connector and remove the instrument cluster center No. 2 finish panel.

2. REMOVE STEREO JACK ADAPTER ASSEMBLY

REMOVE STEREO JACK ADAPTER ASSEMBLY
  1. Disengage the claw and remove the stereo jack adapter assembly.

INSTALLATION

1. INSTALL STEREO JACK ADAPTER ASSEMBLY

INSTALL STEREO JACK ADAPTER ASSEMBLY
  1. Engage the claw to install the stereo jack adapter assembly.

2. INSTALL INSTRUMENT CLUSTER CENTER NO. 2 FINISH PANEL

  1. Connect the connector
    INSTALL INSTRUMENT CLUSTER CENTER NO. 2 FINISH PANEL
  2. Engage the 3 clips to install the instrument cluster center No. 2 finish panel.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.