Toyota Sienna Quiz
Audio / visual

Inspection

In this manual: Audio / visual
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSPECT INVERTER MAIN SWITCH

INSPECT INVERTER MAIN SWITCH
  1. Inspect the continuity between terminal at the each switch position shown in the chart.
INSPECT INVERTER MAIN SWITCH

If continuity is not as specified, replace the main switch assembly.

  1. Inspect the bulb state when connecting the battery to each terminal
INSPECT INVERTER MAIN SWITCH

If operation is not as specified, check the faulty bulb.

INSPECT INVERTER MAIN SWITCH
  1. Inspect continuity of the bulb by connecting the tester as shown in the illustration.

If continuity exists, replace the main switch assembly.

If no continuity exists, replace the bulb.

2. INSPECT INVERTER RELAY

INSPECT INVERTER RELAY
  1. Inspect continuity between terminal at the each switch position shown in the chart.
INSPECT INVERTER RELAY

If continuity is not as specified, replace the point socket relay.

Installation

1. INSTALL VOLTAGE INVERTER ASSEMBLY

INSTALL VOLTAGE INVERTER ASSEMBLY
  1. Install the voltage inverter assembly with the 2 bolts.
Torque: 5.4 N*m (55 kgf*cm, 47 in.*lbf)

NOTICE: Tighten the bolts in order shown in the illustration to in the voltage inverter assembly.

2. INSTALL QUARTER TRIM FRONT PANEL ASSEMBLY LH

3. INSTALL BACK DOOR SCUFF PLATE

4. INSTALL BACK DOOR WEATHERSTRIP

5. INSTALL REAR DOOR WEATHERSTRIP LH

6. INSTALL REAR DOOR SCUFF PLATE LH

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.