Park Assist / Monitoring
Blind Spot Monitor Master Module (C1AB6)
In this manual: Park Assist / Monitoring
~1min read
DESCRIPTION
CAUTION / NOTICE / HINT
This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.
DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
C1AB6 |
The blind spot monitor sensor LH (master) detects an internal malfunction. |
Blind spot monitor sensor LH |
NOTICE:
When checking for DTCs, make sure that the blind spot monitor main switch assembly (warning canceling switch assembly) is on.
PROCEDURECHECK DTC
(a) Clear the DTCs (See page
).
(b) Recheck for DTCs and check if the same DTC is output again (See page
).
OK:
No DTCs are output.
| OK | ![]() |
USE SIMULATION METHOD TO CHECK |
| NG | ![]() |
REPLACE BLIND SPOT MONITOR SENSOR LH |
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.gif)