Terminals Of Ecu
1. BLIND SPOT MONITOR SENSOR LH (MASTER)
Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
B12-3 (BIND) - B12-10 (BLGD) |
Y - W-B |
Blind spot monitor main switch indicator signal |
Blind spot monitor main switch indicator illuminated |
11 to 14 V |
Blind spot monitor main switch indicator not illuminated |
Below 1 V |
|||
B12-4 (OMIL) - B12-10 (BLGD) |
G - W-B |
Outer rear view mirror indicator power source signal RH |
Outer rear view mirror indicator illuminated |
2.5 to 7.5 V |
Outer rear view mirror indicator blinks |
Alternating between 0 to 7.5 V |
|||
Outer rear view mirror indicator not illuminated |
Below 1 V |
|||
B12-5 (BLB) - B12-10 (BLGD) |
LG - W-B |
IG power source signal |
Ignition switch off |
Below 1 V |
Ignition switch ON |
11 to 14 V |
|||
B12-8 (BSSW) - B12-10 (BLGD) |
GR - W-B |
Blind spot monitor main switch assembly (warning canceling switch assembly) signal |
Ignition switch ON, blind spot monitor main switch assembly (warning canceling switch assembly) on |
11 to 14 V |
Ignition switch ON, blind spot monitor main switch assembly (warning canceling switch assembly) off |
Below 1 V |
|||
B12-10 (BLGD) - Body Ground |
W-B - Body ground |
Ground |
Always |
Below 1 V |
2. BLIND SPOT MONITOR SENSOR RH (SLAVE)
Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
B13-3 (BUZ) - B13-10 (BRGD) |
R - W-B |
Rear cross traffic alert buzzer (blind spot monitor buzzer) operation signal |
Rear cross traffic alert buzzer (blind spot monitor buzzer) not sounding |
11 to 14 V |
Outer rear view mirror indicator blinks |
Alternating between 0 to 7.5 V |
|||
Rear cross traffic alert buzzer (blind spot monitor buzzer) sounding |
Alternating between 0 to 14 V |
|||
B13-4 (OMIR) - B13-10 (BRGD) |
SB - W-B |
Outer rear view mirror indicator power source signal LH |
Outer rear view mirror indicator illuminated |
2.5 to 7.5 V |
Outer rear view mirror indicator blinks |
Alternating between 0 to 7.5 V |
|||
Outer rear view mirror indicator not illuminated |
Below 1 V |
|||
B13-5 (BRB) - B13-10 (BRGD) |
LG - W-B |
IG power source signal |
Ignition switch off |
Below 1 V |
Ignition switch ON |
11 to 14 V |
|||
B13-8 (SPR) - B13-10 (BRGD)*1 |
P - W-B |
Shift position reverse switch signal |
Rear cross traffic alert function is active (vehicle is in reverse) |
11 to 14 V |
Rear cross traffic alert function is not active (vehicle is in position other than reverse) |
Below 1 V |
|||
B13-10 (BRGD) - Body Ground |
W-B - Body ground |
Ground |
Always |
Below 1 V |
- *1: for Manual Transmission
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.