Park Assist / Monitoring

Blind Spot Monitor Slave Module (C1AB7)

~1min read
DESCRIPTION

This DTC is stored when the blind spot monitor sensor RH detects an internal malfunction.

DTC Code

DTC Detection Condition

Trouble Area

C1AB7

The blind spot monitor sensor RH (slave) detects an internal malfunction.

Blind spot monitor sensor RH

CAUTION / NOTICE / HINT

NOTICE:

When checking for DTCs, make sure that the blind spot monitor main switch assembly (warning canceling switch assembly) is on.

PROCEDURE
  1. CHECK DTC

(a) Clear the DTCs (See page (b) Recheck for DTCs and check if the same DTC is output again (See page ).

(b) Recheck for DTCs and check if the same DTC is output again (See page OK: ).

OK:

No DTCs are output.

OK

USE SIMULATION METHOD TO CHECK

NG

REPLACE BLIND SPOT MONITOR SENSOR RH

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.