Vehicle Interior
Customize Parameters
CUSTOMIZE PARAMETERS
PROCEDURE
1. CUSTOMIZE METER / GAUGE SYSTEM
(a) Customizing with Techstream
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream ON.
(4) Enter the following menus: Customize Setting / Warning
(5) Select the setting by referring to the table below. Warning
Display (Item) | Default | Content | Setting |
Key Remind Sound |
Slow |
To change frequency of key reminder buzzer |
Normal/Slow/Fast |
Driver Side Seatbelt Warning Buzzer |
ON |
To change setting of driver side seat belt warning buzzer |
ON/OFF |
Front Passenger Side Seatbelt Warning Buzzer |
ON |
To change setting of passenger side seat belt warning buzzer |
ON/OFF |
(b) Customizing with the combination meter assembly
(1) Turn the engine switch on (IG).
(2) Enter the following menus: Settings.
- Language
- Units
- Switch Settings
- Drive Info 1
- Drive Info 2
- Pop-up display
- Accent color
- Default settings
|
Was this page helpful?