1. CHECK COMBINATION METER
(a) Measure the voltage, resistance and waveform according to the value(s) in the table below.
Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| *1: w/ Intuitive Parking Assist System *2: w/ Towing Package
*3: The minimum voltage value varies depending on the +BS terminal voltage value. The minimum voltage is 85% or more of the +BS terminal voltage. |
J28-1 (B) - Body ground |
LG- Body ground |
Power source |
Always |
11 to 14 V |
J28-2 (IG+) - Body ground |
B - Body ground |
Ignitoin switch signal |
Ignition switch off |
Below 1 V |
Ignition switch ON |
11 to 14 V |
J28-3 (BZ) - Body ground*1 |
V - Body ground |
Clearance warning buzzer |
Clearance warning buzzer sounding (when the back sonar senses something) |
Pulse generation |
J28-4 (BK) - Body ground*1 |
SB - Body ground |
Ultrasonic sensor (for rear corner LH and RH) |
Clearance warning indicator LED for back right and left illuminates |
Below 3 V |
J28-5 (OP) - Body ground*1 |
R - Body ground |
Clearance warning ECU signal |
Clearance warning indicator's operation indicator illuminates |
Below 3 V |
J28-6 (FR) - Body ground*1 |
W - Body ground |
Ultrasonic sensor (for front corner RH) |
Clearance warning indicator LED for front corner RH illuminates |
Below 3 V |
J28-7 (FL) - Body ground*1 |
LG - Body ground |
Ultrasonic sensor (for front corner LH) |
Clearance warning indicator LED for front corner LH illuminates |
Below 3 V |
J28-8 (RR) - Body ground*1 |
G - Body ground |
Ultrasonic sensor (for rear corner RH) |
Clearance warning indicator LED for rear corner RH illuminates |
Below 3 V |
J28-9 (RL) - Body ground*1 |
GR - Body ground |
Ultrasonic sensor (for rear corner LH) |
Clearance warning indicator LED for rear corner LH illuminates |
Below 3 V |
J28-10 (MSM+) - Body ground |
P - Body ground |
Steering pad switch signal |
Ignition switch ON, enter, top and back switches on steering pad switch not pushed |
4.3 to 5.2 V |
Ignition switch ON, enter switch on steering pad switch pushed |
Below 0.6 V |
Ignition switch ON, top switch on steering pad switch pushed |
1.0 to 2.2 V |
Ignition switch ON, back switch on steering pad switch pushed |
2.3 to 3.4 V |
J28-11 (MSTI) - Body ground |
L - Body ground |
Steering pad switch signal |
Ignition switch ON, up, wn, right and left switches on steering pad switch assembly not pushed |
4.3 to 5.2 V |
Ignition switch ON, left switch on steering pad switch pushed |
Below 0.6 V |
Ignition switch ON, up switch on steering pad switch pushed |
1.0 to 2.2 V |
Ignition switch ON, down switch on steering pad switch pushed |
2.3 to 3.4 V |
Ignition switch ON, right switch on steering pad switch pushed |
3.4 to 4.5 V |
J28-12 (MSSL) - Body ground |
BE - Body ground |
Ground |
Always |
Below 1 Ω |
J28-13 (CHG-) - Body ground |
B - Body ground |
CHARGE warning light |
Ignition switch ON, washer level warning light ON |
Below 1 V |
Ignition switch ON, washer level warning light OFF |
11 to 14 V |
J28-14 (SW) - Body ground |
R - Body ground |
Brake fluid level warning light signal |
Ignition switch ON, BRAKE warning light ON |
Below 1 V |
Ignition switch ON, BRAKE warning light OFF |
11 to 14 V |
J28-15 (WLVL) - Body ground |
SB - Body ground |
Washer level warning light |
Ignition switch ON, washer level warning light ON |
Below 1 V |
Ignition switch ON, washer level warning light OFF |
11 to 14 V |
J28-28 (EL) - Body ground |
LG - Body ground |
Turn signal L |
Ignition switch ON, turn signal switch neutral position |
Below 1 V |
Ignition switch ON, turn signal switch turned to left |
Alternating between below 1V and 11 to 14 V |
J28-17 (ER) - Body ground |
G - Body ground |
Turn signal R |
Ignition switch ON, turn signal switch neutral position |
Below 1 V |
Ignition switch ON, turn signal switch turned to right |
Alternating between below 1V and 11 to 14 V |
J28-18 (MSCH) |
Y |
CAN commuinication |
- |
- |
J28-19 (MSCL) |
W |
CAN commuinication |
- |
- |
J28-20 (HAZ) - Body ground |
L - Body ground |
Hazard warning signal switch signal (Output) |
Hazard warning signal switch off |
Below 1 V |
Hazard warning signal switch on |
Alternating between below 1V and 11 to 14 V |
J28-22 (ILL-) - Body ground |
BE - Body ground |
Illumination signal |
Headlight dimmer switch off |
Below 1 V |
Headlight dimmer switch in tail or head position |
11 to 14 V |
J28-23 (EP) - Body ground |
W-B - Body ground |
Illumination ground |
Always |
Below 1 Ω |
J28-24 (ES) - Body ground |
BR - Body ground |
Ground |
Always |
Below 1 Ω |
J28-25 (E3) - Body ground |
Y - Body ground |
Fuel sender gauge ground |
Always |
Below 1 Ω |
J28-26 (L) - Body ground |
V - Body ground |
Fuel sender gauge |
Ignition switch ON, fuel sender gauge ON |
Below 1 V |
Ignition switch ON, fuel sender gauge OFF |
11 to 14 V |
J28-27 (S) - Body ground |
L - Body ground |
Oil pressure warning light |
Ignition switch ON, oil pressure warning light ON |
Below 1 V |
Ignition switch ON, oil pressure warning light OFF |
11 to 14 V |
J28-28 (SW) - Body ground |
BE - Body ground |
Turn signal switch signal |
Ignition switch ON, LH and RH turn signal switch off |
11 to 14 V |
Ignition switch ON, LH or RH turn signal switch on |
Below 1 V |
J28-29 (+S) - Body ground |
SB - Body ground |
Speed signal (output) |
Ignition switch ON, wheel turned slowly |
Pulse generation
(See waveform 1) |
J28-30 (SI) - Body ground |
LG - Body ground |
Speed signal for other system (Input) |
Ignition switch ON, wheel being rotated |
Pulse generation
(See waveform 1) |
J28-31 (P) - Body ground |
V - Body ground |
A/T shift position signal P |
Ignition switch ON, shift lever not in P |
Below 1 V |
Ignition switch ON, shift lever in P |
11 to 14 V |
J28-32 (R) - Body ground |
R - Body ground |
A/T shift position signal R |
Ignition switch ON, shift lever not in R |
Below 1 V |
Ignition switch ON, shift lever in R |
11 to 14 V |
J28-33 (N) - Body ground |
W - Body ground |
A/T shift position signal N |
Ignition switch ON, shift lever not in N |
Below 1 V |
Ignition switch ON, shift lever in N |
11 to 14 V |
J28-34 (D) - Body ground |
L - Body ground |
A/T shift position signal D |
Ignition switch ON, shift lever not in D |
Below 1 V |
Ignition switch ON, shift lever in D |
11 to 14 V |
J28-35 (4) - Body ground |
V - Body ground |
A/T shift position signal S |
Ignition switch ON, shift lever not in S |
Below 1 V |
Ignition switch ON, shift lever in S |
11 to 14 V |
J28-36 (LP) - Body ground |
BE - Body ground |
Security indicator light signal |
Immobiliser set status (SET) |
Alternating between 11 to 14 V and below 1 V |
Immobiliser set status (UNSET) |
Below 1 V |
J28-38 (BKSW) - Body ground |
R - Body ground |
Stop light control relay (stop light switch assembly) input |
Stop light switch assembly on → off (Brake pedal depressed → released) |
(+BS x 0.85) to 14 V*3 → Below 1.5 V |
J28-39 (CANH) |
SB |
CAN commuinication |
- |
- |
J28-40 (CANL) |
W |
CAN commuinication |
- |
- |
J171-1 (TRT) - Body ground*2 |
B - Body ground |
Trailer socket signal RH signal |
Ignition switch ON, turn signal switch neutral position |
Below 1 V |
Ignition switch ON, turn signal switch turned to right |
Alternating between below 1V and 11 to 14 V |
J171-7 (TLT) - Body ground*2 |
Y - Body ground |
Trailer socket signal LH signal |
Ignition switch ON, turn signal switch neutral position |
Below 1 V |
Ignition switch ON, turn signal switch turned to left |
Alternating between below 1V and 11 to 14 V |
J171-8 (B) - Body ground |
V - Body ground |
Power source |
Always |
11 to 14 V |
J171-9 (LL) - Body ground |
G - Body ground |
Turn signal L |
Ignition switch ON, turn signal switch neutral position |
Below 1 V |
Ignition switch ON, turn signal switch turned to left |
Alternating between below 1V and 11 to 14 V |
J171-10 (LR) - Body ground |
BE - Body ground |
Turn signal R |
Ignition switch ON, turn signal switch neutral position |
Below 1 V |
Ignition switch ON, turn signal switch turned to right |
Alternating between below 1V and 11 to 14 V |
J171-11 (RLT) - Body ground |
B - Body ground |
Rear turn signal light LH signal |
Ignition switch ON, turn signal switch neutral position |
Below 1 V |
Ignition switch ON, turn signal switch turned to left |
Alternating between below 1V and 11 to 14 V |
J171-12 (RRT) - Body ground |
SB - Body ground |
Rear turn signal light RH signal |
Ignition switch ON, turn signal switch neutral position |
Below 1 V |
Ignition switch ON, turn signal switch turned to right |
Alternating between below 1V and 11 to 14 V |
J171-13 (B) - Body ground |
GR - Body ground |
Power source |
Always |
11 to 14 V |
When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.
2. CHECK COMBINATION METER INNER CIRCUIT