Vehicle Interior
Lost Communication with ECM / PCM "A" (U0100)
In this manual: Vehicle Interior
~1min read
DESCRIPTIONThe combination meter communicates with the ECM via the CAN line.
WIRING DIAGRAM
PROCEDURE
(a) Check for DTCs and note any codes that are output (See page (b) Clear the DTC (See page (c) Recheck for DTC (See page
HINT: If the CAN communication system DTC U0100 and another DTC are output at the same time, perform troubleshooting for the CAN communication system DTC U0100 first.
|
Was this page helpful?