OPERATION CHECK
1. INSPECT INDICATOR/WARNING LIGHT
HINT:
In this inspection, an indicator or warning light might come on differently than is specified, under some normal conditions.
(a) Check the following indicators and warning lights.
Warning/Indicator Light | Switch Condition | Specified Condition |
Brake warning light |
Ignition switch off → ON |
Comes on for 3 seconds |
PCS OFF indicator light*1 |
Ignition switch off → ON |
Comes on for 3 seconds |
ABS warning light |
Ignition switch off → ON |
Comes on for 3 seconds |
SLIP indicator light |
Ignition switch off → ON |
Comes on for 3 seconds |
AUTO LSD indicator light |
Ignition switch off → ON |
Comes on for 3 seconds |
VSC OFF indicator light |
Ignition switch off → ON |
Comes on for 3 seconds |
TOW HAUL indicator light*2 |
Ignition switch off → ON |
Comes on for 3 seconds |
EPS warning light |
Ignition switch off → ON |
Comes on for 3 seconds |
Tire pressure warning light |
Ignition switch off → ON |
Comes on for 3 seconds |
SRS warning light |
Ignition switch off → ON |
Comes on for 6 seconds |
CHARGE warning light |
Ignition switch off → ON |
Illuminates when ignition switch is turned to ON.
Turns off when engine is started. |
MIL |
Ignition switch off → ON |
Illuminates when ignition switch is turned to ON.
Turns off when engine is started. |
- *1: w/ Pre-collision System
- *2: w/ Towing Package
2. INSPECT SPEEDOMETER
(a) Connect the Techstream to the DLC3 connector.
(b) Turn the ignition switch ON.
(c) Turn the Techstream ON.
(d) Enter the following menus: Powertrain / Engine and ECT / Data List.
(e) According to the display on Techstream, read the Data List.
Reference: for mph
Techstream Display | Speedometer Display |
20 mph |
19.1 to 22 mph |
40 mph |
39.3 to 42 mph |
60 mph |
59.6 to 62 mph |
80 mph |
79.8 to 83 mph |
100 mph |
99.9 to 103 mph |
for km/h
Techstream Display | Speedometer Display
Data in ( ) is for reference |
20 km/h |
(18.3 to 22 km/h) |
40 km/h |
38.5 to 43 km/h |
60 km/h |
58.8 to 63 km/h |
80 km/h |
78.9 to 84 km/h |
100 km/h |
99.2 to 104 km/h |
120 km/h |
119.6 to 125 km/h |
140 km/h |
139.9 to 145 km/h |
160 km/h |
160.3 to 165 km/h |
180 km/h |
180.6 to 186 km/h |
NOTICE:
Do not use worn, underinflated or overinflated tires, as the speedometer reading will be inaccurate.
(f) Check the deflection width of the speedometer indicator.
Reference:
0,5 km/h
3. INSPECT TACHOMETER
(a) Connect a tune-up tachometer, and start the engine.
(b) Compare the test results with the tachometer indicator.
DC 13.5 V, at 25 °C:
Standard indication (rpm) | Acceptable range
Data in ( ) is for reference |
700 |
630 to 770 |
1000 |
(900 to 1100) |
2000 |
(1850 to 2150) |
3000 |
2800 to 3200 |
4000 |
(3800 to 4200) |
5000 |
4800 to 5200 |
6000 |
(5750 to 6250) |
If the result is not as specified, the speedometer may have a malfunction.
4. INSPECT METER/GAUGE
(a) Connect the Techstream to the DLC3.
(b) Perform Active Test (See page ).
OK:
All meter/gauge needle indicators are normal.
5. INSPECT WARNING/INDICATOR LIGHT
(a) Connect the Techstream to the DLC3.
(b) Perform Active Test (See page ).
OK:
Each warning/indicator light turns ON and OFF using tester.
6. INSPECT MULTI-INFORMATION DISPLAY
(a) Connect the Techstream to the DLC3.
(b) Perform Active Test (See page ).
HINT:
If this Active Test is being performed and the ignition switch is turned off and then ON, the A/T and ODO/TRIP display background may turn white. If this occurs, end this Active Test and turn the ignition switch off.
OK:
All dots in the multi-information display turn ON and OFF using Techstream. |