Brake
Skid Control ECU Malfunction (C1300)
In this manual: Brake
~1min read
DESCRIPTIONThe skid control ECU (brake actuator assembly) stores this DTC if malfunctions are found in a circuit inside the ECU by self diagnosis.
NOTICE: When replacing the skid control ECU (brake actuator assembly), perform system variant learning and acceleration sensor zero point calibration. Click here PROCEDURE
(a) Replace the skid control ECU (brake actuator assembly). Click here HINT: This DTC is output when the skid control ECU (brake actuator assembly) detects a malfunction in an internal circuit.
|
Was this page helpful?