Brake

Steering Angle Sensor Internal Circuit (C1433)

~1min read

DESCRIPTION

This DTC is stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the steering angle sensor (spiral with sensor cable sub-assembly).

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1433

Steering Angle Sensor Internal Circuit

With the +BS terminal voltage between 9.6 and 16.5 V, a steering angle sensor malfunction signal is received from the steering angle sensor.

Steering angle sensor (spiral with sensor cable sub-assembly)

PROCEDURE

  1. REPLACE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

(a) Replace the steering angle sensor (spiral with sensor cable sub-assembly).

Click here

NEXT

END