Console Box Light

Components COMPONENTS ILLUSTRATION
Removal REMOVAL PROCEDURE

1. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System)

2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System)

3. REMOVE NO. 2 CONSOLE BOX CARPET

4. REMOVE CONSOLE BOX ASSEMBLY

5. REMOVE CONSOLE MOUNTING RETAINER ASSEMBLY

6. REMOVE CONSOLE BOX WIRE

7. REMOVE CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY

(a) Disengage the 4 claws and remove the 2 console box illumination light assemblies.

Inspection INSPECTION PROCEDURE

1. INSPECT CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY

(a) Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.

(b) Check that the console box illumination light comes on.

OK:

Console box illumination light comes on.

Text in Illustration

*1	Component without harness connected (Console Box Illumination Light Assembly)

If the result is not as specified, replace the console box illumination light assembly.

Installation INSTALLATION PROCEDURE

1. INSTALL CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY

(a) Engage the 4 claws to install the 2 console box illumination light assemblies.

2. INSTALL CONSOLE BOX WIRE

3. INSTALL CONSOLE MOUNTING RETAINER ASSEMBLY

4. INSTALL CONSOLE BOX ASSEMBLY

5. INSTALL NO. 2 CONSOLE BOX CARPET

6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System)

7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System)