Door Mirror Foot Light

Components COMPONENTS ILLUSTRATION
Removal REMOVAL CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure described below is for the LH side.

PROCEDURE

1. REMOVE OUTER MIRROR

2. REMOVE OUTER MIRROR LIGHT ASSEMBLY

(a) Disengage the 2 claws and guide from the outer rear view mirror assembly.

(b) Disconnect the connector and remove the outer mirror light assembly.

Inspection INSPECTION PROCEDURE

1. INSPECT OUTER MIRROR LIGHT ASSEMBLY LH

(a) Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.

(b) Check that the outer mirror foot light comes on.

OK:

The light comes on.

Text in Illustration

*1	Component without harness connected (Outer Mirror Light Assembly LH)

If the result is not as specified, replace the outer mirror light assembly LH.

2. INSPECT OUTER MIRROR LIGHT ASSEMBLY RH

(a) Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.

(b) Check that the outer mirror foot light comes on.

OK:

The light comes on.

Text in Illustration

*1	Component without harness connected (Outer Mirror Light Assembly RH)

If the result is not as specified, replace the outer mirror light assembly RH.

Installation INSTALLATION CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure described below is for the LH side.

PROCEDURE

1. INSTALL OUTER MIRROR LIGHT ASSEMBLY

(a) Connect the connector.

(b) Engage the guide and 2 claws to install the outer mirror light assembly.

2. INSTALL OUTER MIRROR