Side Turn Signal Light Assembly

Components COMPONENTS ILLUSTRATION
Removal REMOVAL CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for the RH and LH sides.
• The procedure described below is for the LH side.

PROCEDURE

1. REMOVE OUTER MIRROR

2. REMOVE OUTER MIRROR COVER

3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY

(a) Remove the screw.

(b) Disengage the 2 claws.

(c) Disconnect the connector and remove the side turn signal light assembly.

Inspection INSPECTION PROCEDURE

1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

(a) Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.

(b) Check that the side turn signal light comes on.

OK:

The light comes on.

Text in Illustration

*1	Component without harness connected (Side Turn Signal Light Assembly LH)

If the result is not as specified, replace the side turn signal light assembly LH.

2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

(a) Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.

(b) Check that the side turn signal light comes on.

OK:

The light comes on.

Text in Illustration

*1	Component without harness connected (Side Turn Signal Light Assembly RH)

If the result is not as specified, replace the side turn signal light assembly RH.

Installation INSTALLATION CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for the RH and LH sides.
• The procedure described below is for the LH side.

PROCEDURE

1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY

(a) Connect the connector.

(b) Engage the 2 claws.

(c) Install the side turn signal light assembly with the screw.

2. INSTALL OUTER MIRROR COVER

3. INSTALL OUTER MIRROR