Dtc Check / Clear

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Back Door / DTC.

HINT:

Refer to the Techstream operator's manual for further details.

(e) Check DTCs and then write them down.

(f) Confirm the details of the DTCs (See page ).

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Back Door / DTC / Clear.

HINT:

Refer to the Techstream operator's manual for further details.

(e) Clear the DTCs by following the directions on the Techstream screen.