U660e Automatic Transmission / Transaxle

Inspection

~1min read
INSPECTION PROCEDURE

1. INSPECT ATF TEMPERATURE SENSOR ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

E2 - THO1

10 °C

5 to 8 kΩ

E2 - THO1

25 °C

2.5 to 4.5 kΩ

E2 - THO1

110 °C

0.22 to 0.28 kΩ

THO1 - Body ground

Always

10 kΩ or higher

If the resistance is out of the specified range with the ATF temperature shown in the preceding table, replace the ATF temperature sensor assembly. Otherwise, the driveability of the vehicle may decrease.

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.