Installation

1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY

(a) Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly. Text in Illustration *1 O-ring

(b) Coat the 4 bolts with ATF.

(c) Install the ATF temperature sensor assembly and clamp to the transmission valve body assembly with the 4 bolts. Text in Illustration *a ATF Temperature Sensor Assembly Connector *b Clamp Torque: 11 N·m {112 kgf·cm, 8 ft·lbf} Bolt length: Bolt (A) 25 mm (0.984 in.) Bolt (B) 85 mm (3.35 in.)

(d) Connect the ATF temperature sensor assembly connector.

2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

4. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

HINT:

See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" (See page ).