U660e Automatic Transmission / Transaxle
Removal
In this manual: U660e Automatic Transmission / Transaxle
~1min read
REMOVAL PROCEDURE
.gif)
.gif)
1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY
HINT:
See the steps from "Remove Engine Assembly with transaxle" through "Remove Automatic Transaxle Assembly" (See page
).
2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY
.gif)
3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY
.gif)
4. REMOVE ATF TEMPERATURE SENSOR ASSEMBLY
(a) Disconnect the ATF temperature sensor assembly connector. |
![]() |
(b) Remove the 4 bolts, ATF temperature sensor assembly and clamp from the transmission valve body assembly.
Text in Illustration*a |
Clamp |
*b |
ATF Temperature Sensor Assembly Connector |
(c) Remove the O-ring from the ATF temperature sensor assembly. Text in Illustration
|
![]() |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?

