Installation

INSTALLATION PROCEDURE

1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

(a) Engage the 8 clamps.

(b) Engage the 2 claws and connect the fuel lid lock control cable sub-assembly.

2. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

(a) Connect the fuel lid lock control cable sub-assembly.

(b) Install the fuel lid lock open lever sub-assembly with the bolt. Torque: 5,5 N·m {56 kgf·cm, 49 in·lbf}

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

4. CONNECT REAR SEAT OUTER BELT ASSEMBLY LH

5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY LH

6. INSTALL RECLINING REMOTE CONTROL BEZEL LH

7. INSTALL REAR SEAT ASSEMBLY LH

8. CONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY

9. INSTALL REAR SEAT OUTER TRACK BRACKET COVER LH

10. INSTALL REAR SEAT INNER TRACK BRACKET COVER LH

11. INSTALL REAR SEAT HEADREST ASSEMBLY LH

12. INSTALL REAR FLOOR FINISH PLATE

13. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY

14. INSTALL NO. 1 DECK BOARD

15. INSTALL DECK SIDE TRIM BOX LH

16. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

17. INSTALL DECK SIDE TRIM BOX RH

18. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

19. INSTALL DECK BOARD ASSEMBLY

20. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

21. INSTALL LOWER CENTER PILLAR GARNISH LH

22. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

23. INSTALL LAP BELT OUTER ANCHOR COVER LH

24. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

25. INSTALL REAR DOOR SCUFF PLATE LH

26. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

27. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

28. INSTALL FRONT DOOR SCUFF PLATE LH

29. INSTALL FRONT SEAT ASSEMBLY LH

(See page )