Removal

REMOVAL PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

(See page )

2. REMOVE FRONT DOOR SCUFF PLATE LH

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

4. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

5. REMOVE REAR DOOR SCUFF PLATE LH

6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

7. REMOVE LAP BELT OUTER ANCHOR COVER LH

8. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

9. REMOVE LOWER CENTER PILLAR GARNISH LH

10. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

11. REMOVE DECK BOARD ASSEMBLY

12. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

13. REMOVE DECK SIDE TRIM BOX LH

14. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY

15. REMOVE DECK SIDE TRIM BOX RH

16. REMOVE NO. 1 DECK BOARD

17. REMOVE REAR SEAT SUB FLOOR PANEL ASSEMBLY

18. REMOVE REAR FLOOR FINISH PLATE

19. REMOVE REAR SEAT HEADREST ASSEMBLY LH

20. REMOVE REAR SEAT INNER TRACK BRACKET COVER LH

21. REMOVE REAR SEAT OUTER TRACK BRACKET COVER LH

22. DISCONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY

23. REMOVE REAR SEAT ASSEMBLY LH

24. REMOVE RECLINING REMOTE CONTROL BEZEL LH

25. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY LH

26. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH

27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

28. DISCONNECT FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

(a) Remove the bolt.

(b) Disconnect the fuel lid lock open lever sub-assembly as shown in the illustration.

(c) Disconnect the fuel lid lock control cable sub-assembly.

29. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

(a) Disengage the 2 claws and disconnect the fuel lid lock control cable sub-assembly.

(b) Disengage the 8 clamps and remove the fuel lid lock control cable sub-assembly.