Installation

INSTALLATION PROCEDURE

1. INSTALL POWER BACK DOOR UNIT ASSEMBLY

(a) Install the power back door unit with the 4 bolts. Torque: 13 N·m {133 kgf·cm, 10 ft·lbf}

(b) Connect the connector.

2. INSTALL POWER BACK DOOR ROD

(a) When reusing the power back door rod:

(1) Install the 2 stop rings to the power back door rod.

(b) Engage the power back door rod.

(c) Install the power back door rod.

(d) Check that the power back door rod is engaged in the ball joint and that the power back door rod cannot be pulled out.

3. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

5. CONNECT REAR SEAT OUTER BELT ASSEMBLY LH

6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY LH

7. INSTALL RECLINING REMOTE CONTROL BEZEL LH

8. INSTALL REAR SEAT ASSEMBLY LH

9. CONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY

10. INSTALL REAR SEAT OUTER TRACK BRACKET COVER LH

11. INSTALL REAR SEAT INNER TRACK BRACKET COVER LH

12. INSTALL REAR SEAT HEADREST ASSEMBLY LH

13. INSTALL REAR FLOOR FINISH PLATE

14. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY

15. INSTALL NO. 1 DECK BOARD

16. INSTALL DECK SIDE TRIM BOX LH

17. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

18. INSTALL DECK SIDE TRIM BOX RH

19. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

20. INSTALL DECK BOARD ASSEMBLY

21. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

22. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

23. INSTALL REAR DOOR SCUFF PLATE LH

24. INITIALIZE EASY CLOSER SYSTEM

(See page )

25. INITIALIZE POWER BACK DOOR SYSTEM

(See page )