Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System)

3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System)

4. REMOVE NO. 2 CONSOLE BOX CARPET

5. REMOVE CONSOLE BOX ASSEMBLY

6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

7. REMOVE FRONT DOOR SCUFF PLATE LH

8. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

10. REMOVE FRONT DOOR SCUFF PLATE RH

11. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

12. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

13. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

14. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

15. REMOVE POSITION INDICATOR HOUSING ASSEMBLY

16. REMOVE CONSOLE BOX SUB-ASSEMBLY

17. REMOVE SHIFT LEVER ASSEMBLY

(a) Move the shift lever to N.

(b) Disconnect the 2 connectors.

(c) Remove the 4 nuts and shift lever assembly.

(d) Disconnect the end of the transmission control cable assembly from the shift lever assembly.

(e) Turn the lock nut counterclockwise. While holding the lock nut, disconnect the transmission control cable from the shift lever retainer.