Theft Deterrent / Keyless Entry
Theft Deterrent System Presence Detection (B279C)
In this manual: Theft Deterrent / Keyless Entry
~1min read
DESCRIPTION
CAUTION / NOTICE / HINT
PROCEDURE
If an ECM that is incompatible with the engine immobiliser system is installed, the ECM stores this DTC.
DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
B279C |
An ECM that is incompatible with engine immobiliser system is installed. |
ECM |
NOTICE:
If the ECM is replaced, register the ECU communication ID (See page
).
PROCEDURE
CHECK DTC OUTPUT
(a) Clear the DTCs (See page
).
(b) Recheck for DTCs (See page
).
OK:
DTC B279C is not output.
Result | Proceed to |
|---|---|
OK |
A |
NG (for 2GR-FE) |
B |
NG (for 1AR-FE) |
C |
| A | ![]() | USE SIMULATION METHOD TO CHECK |
| B | ![]() | REPLACE ECM |
| C | ![]() | REPLACE ECM |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.gif)