Theft Deterrent / Keyless Entry
Transponder Chip Malfunction (B2793)
In this manual: Theft Deterrent / Keyless Entry
~1min read
DESCRIPTION
CAUTION / NOTICE / HINT
PROCEDURE
This DTC is stored when a malfunction is found in the key during key code registration or a key code is not registered normally. Replace the key if the key code registration is not performed normally and this DTC is detected.
DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
B2793 |
Transponder chip malfunction. |
Key |
NOTICE:
If the key is replaced, register the key (See page
).
PROCEDURE
CLEAR DTC
(a) Clear the DTCs (See page
).
|
RE-REGISTER KEY
(a) Re-register the key (See page
).
|
CHECK ENGINE START
(a) Check that the engine starts.
OK:
The engine starts.
| OK | ![]() | END (KEY WAS NOT REGISTERED CORRECTLY) |
| NG | ![]() | REPLACE KEY |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.gif)
.gif)