Fuel Supply - Petrol Engines
Accelerator pedal operation
In this manual: Fuel Supply - Petrol Engines
4steps
~24min
2/5difficulty
Done 0 of 4
Assembly overview - accelerator pedal module

- Brake pedal
- Removing and installing → Brake system
- Connector
- black
- Accelerator pedal module
- Removing and installing accelerator pedal module
- Bolt
- 6 N·m
Removing and installing accelerator pedal module
Removing
- Remove steering column trim -2-, for this unscrew screws -1-.
- Unlock and disconnect connector on accelerator pedal module.

- Unscrew mounting bolt -arrow- from brake pedal bracket.

- Pull accelerator pedal module -4- downward out of guides -2-.
- Remove accelerator pedal module.
Installing
Installation is carried out in the reverse order. Observe the following:

- Insert retaining lugs -3- of accelerator pedal module -4- correctly into guide -2- on brake pedal bracket -1-.
- Make sure guide -5- of accelerator pedal module -4- is correctly seated in bore -6- on brake pedal bracket -1-.

Tightening torque

Was this page helpful?