Chassis, Axles, Steering
Front wheel suspension, driveshaft
In this manual: Chassis, Axles, Steering
4steps
~24min
2/5difficulty
Done 0 of 4
Front axle
Overview - Front axle
Note
- Welding and straightening work on load-bearing and wheel-guiding components of the wheel suspension is not permitted.
- Always replace self-locking nuts.
- Always replace corroded bolts/nuts.
- Rubber-metal bearings have a limited rotation range. Therefore, only tighten the bolted connections on components with rubber-metal bearings once the wheel bearing housing is raised (unladen position).

- "Subframe"
- "Strut, upper control arm"
- "Lower control arm, ball joint"
- "Wheel bearing"
Was this page helpful?