Body assembly work, exterior

Underbody cover

22steps
~132min
4/5difficulty
0102030405021N·mlb·ft
Tightening torque found on this page
Done 0 of 22

Assembly overview - Gas tank cover

VW UP. Karosserie-Montagearbeiten AuГџen

  1. Cover
    • for front gas tank
  2. Hex nut
    • 4 pieces for front gas tank
    • 3 pieces for rear gas tank
    • 2 N·m
  3. Cover
    • for rear gas tank
  4. Retaining hook
    • Is pushed onto the gas tank mount -arrow-.
  5. Bolt
    • 2 pieces
    • 2 N·m
  6. Expansion nut
    • 2 pieces
  7. Hex nut
    • 1 piece
    • 2 N·m

Assembly overview - Front underbody cover

VW UP. Karosserie-Montagearbeiten AuГџen

  1. Underbody cover
    • right side only
  2. Bolt
    • 5 pieces
    • 2 N·m
  3. Hex nut
    • 1 piece
    • 2 N·m
    • Component of replacement part
  4. Snap nut
    • 4 pieces

Assembly overview - Underbody cover

VW UP. Karosserie-Montagearbeiten AuГџen

  1. Underbody cover, right
  2. Underbody cover, left
  3. Hex nut
    • 3 pieces per side
    • 2 N·m

Assembly overview - Underbody cover e-up!

VW UP. Karosserie-Montagearbeiten AuГџen

  1. Front underbody cover.

Removing:

- Unscrew screws -6 and 7-.

  1. Expansion nut
    • 2 pieces
  2. Rear underbody cover

Removing:

- Remove front underbody cover.

- Unscrew screws -4- and hex nuts -5-.

  1. Bolt
    • 4 pieces
    • 2 N·m
  2. Hex nut
    • 9 pieces
    • 2 N·m
  3. Bolt
    • 4 pieces
    • 2 N·m
  4. Bolt
    • 8 pieces
    • 6 N·m

Assembly overview - Tunnel bridge

Required special tools, testers and equipment, and auxiliary items

  • Torque wrench -V.A.G 1331-
VW UP. Karosserie-Montagearbeiten AuГџen

VW UP. Karosserie-Montagearbeiten AuГџen

  1. Tunnel bridge
    • Removing:
      • Unscrew screws -2-.
  2. Hex nut
    • 4 pieces
    • Tightening torque: 20 N·m

Remove and install front underbody cover

Remove and install front underbody cover

VW UP. Karosserie-Montagearbeiten AuГџen

Removing

- Unscrew bolts -2-.

- Unscrew hex nut -3-. Hex nut remains on the underbody cover.

Installing

- Position underbody cover -1- in installation position.

- Tighten screws -2-.

- Tighten hex nut -3-.

Tightening torques

  • Bolts
  • Hex nut

Remove and install front underbody cover (retrofit solution)

VW UP. Karosserie-Montagearbeiten AuГџen

Removing

- Unscrew bolts -2-.

- Unscrew screw -2-. Washer -3- remains on the underbody cover.

Installing

  • Rivet nut -4- is installed.

- Attach washer -2- to the underbody cover.

- Position underbody cover -1- in installation position.

- Tighten screws -2-.

- Tighten hex nut -3-.

Tightening torques

  • Bolts
  • Hex nut