Operating the Panoramic Roof

(Option/accessory)

The panoramic roof and sun curtain are operated using a control in the ceiling panel, and both are equipped with pinch protection.

• Always operate the windows with caution.
• Do not allow children to play with the operating controls.
• Never leave a child unattended in the vehicle.
• Remember to always cut the current to the power windows by setting the vehicle's electrical system to ignition mode 0 and then taking the key with you when leaving the vehicle.
• Never stick objects or body parts out through the windows, even if the vehicle electrical system is completely turned off.

• Do not open the panoramic roof when roof racks are installed.
• Never place heavy objects on the panoramic roof.

• Remove ice and snow before opening the panoramic roof. Be careful not to scratch any surfaces or damage the trim.
• Do not operate the panoramic roof if it is frozen in place.

To operate the panoramic roof and sun curtain, the ignition must be in mode I or II.

It can also be operated using keyless unlocking* with the door handle.

The movement of the roof will stop if the control is released during manual operation or when the glass has reached the comfort¹ or fully open/closed position. The movement of both the panoramic roof and the sun curtain is also stopped if the control in the ceiling is operated again in the direction opposite that of the current direction of movement.

The panoramic roof and sunshade also have pinch protection. If there is any problem with the pinch protection, a reset procedure can be performed.

Opening and Closing the Ventilation Position

Ventilation position, rear edge raised.

Open by pushing the control upward once.

Close by pushing the control downward once.

When ventilation mode is selected, the rear edge of the front section of the roof is raised. If the sunshade is fully closed when the ventilation position is selected, it will automatically open approx. 50 mm (approx. 2 in).

If the panoramic roof is closed from the ventilation position, the sun curtain will also automatically close.

Fully Opening and Closing the Panoramic Roof with the Ceiling Control

Manual Operation, Manual Mode

Operation, manual mode

Operation, automatic mode

Manual Operation

1. 1
   To open the sunshade, pull the control back to manual open mode.
2. 2
   To open the panoramic roof to the comfort position, pull the control backward a second time to the manual opening position.
3. 3
   To open the panoramic roof fully, pull the control backward a third time to the manual opening position.

Close by repeating the above procedure in reverse - push the control forward/down to the manual closing position.

Automatic Operation

1. 1
   To open the sun curtain to the fully open position, pull the control backward to the auto open mode and release.
2. 2
   To open the panoramic roof to the comfort position, pull the control backward a second time to the automatic opening position and release.
3. 3
   To open the panoramic roof fully, pull the control backward a third time to the automatic opening position and release.

Close by repeating the above procedure in reverse - push the control forward/down to the auto close position.

Automatic Operation - Quick Opening or Closing

The panoramic roof and sunshade can be opened or closed at the same time:

• Open - press the control backward twice to the automatic operation position and release.
• Close - press the control forward/down twice to the automatic operation position and release.

¹ The comfort position is a position which helps keep wind and resonance sounds to a comfortably low level.

* Option/accessory.