Storing Radio Presets

Manual Storing of Radio Stations Select the desired memory level, e.g. FM1, FM2, FMT, or the MW or LW band. To do so, press the AM/FM button (14) until the desired frequency band/memory level appears on the display.

Tune to the desired radio station.

To store a radio station under a specific button, press and hold one of the radio station buttons 1 – 5 (12) for more than two seconds.

Automatic station storing (automatic tuning and memory programming function of the radio receiver) Five stations with the strongest signal in the area can be automatically selected and stored (FM mode only).

The stations are stored in FMT memory.

All previously stored stations at this memory level will be erased from memory.

Press and hold the SCAN (TS) button (15) for more than two seconds.

The station will be recorded into the audio system memory. The “T-STORE” message appears on the display. After the storing process is complete, the signal of the station stored in FMT memory location 1 will be played.

Listening to radio presets:

Select the memory level or frequency band.

Press the 1 – 5 button (12) corresponding to the number of the desired radio station.