Driver information instrument cluster
Operating principle: instrumentation
In this manual: Driver information instrument cluster
~1min read
GENERAL OPERATION OF EQUIPMENT

General
A warning lamp symbol is only visible when its bulb is lit.
Not all information acquired directly by the instrument cluster is displayed directly: each warning lamp is lit after confirmation is received via the VAN CONFORT network.
The warning lamp lighting logic is as follows:
| FLASHING | A flashing state of a warning lamp (even timed) takes priority over a steady-lit state. |
| FILTERING | Inputs are not filtered (signals are acquired without processing). |
| DEGRADED MODE | In case of a network communication error or receipt of an invalid value, the warning lamps take a default value 5 seconds after the fault appears. During this time, the last value received is displayed. |
Warning lamp operation
The table below describes the information transmitted by each warning lamp depending on the vehicle's operating situations.


Test yourself
A quick Citroen C5 Aircross quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?