Settings

Set up profiles

Press Settings to display the main page.

Press "Profiles".

Select "Profile 1" or "Profile 2" or "Profile 3" or "Common profile".

Press this key to enter a profile name using the virtual keyboard.

Press "OK" to save.

Press the back arrow to confirm.

Press this key to activate the profile.

Press the back arrow again to confirm.

Press this key to reset the selected profile.

Adjust the brightness

Press Settings to display the main page.

Press Brightness.

Move the slider to adjust the brightness of the screen and/or the instrument cluster (depending on version).

Press in the grey area to confirm.

Change the system settings

Press Settings to display the main page.

Press "Configuration" to access the secondary page.

Press "System configuration".

Press the "Units" tab to change the units of distance, consumption and temperature.

Press the "Factory settings" tab to return to the initial settings.

Resetting the system to factory settings activates English as the default language (depending on version).

Press the "System info" tab to view the software version of the various modules installed in the system.

Press the "Privacy" tab, or

Press Settings to display the main page.

Press "Privacy" to enable or disable private data mode.

Enable or disable:

- "No sharing (data, vehicle location)".

- "Data sharing only"

- "Data and vehicle location sharing"

Press the back arrow to confirm.

Press Settings to display the main page.

Press "Configuration" to access the secondary page.

Press "Screen configuration".

Press "Brightness".

Move the slider to adjust the brightness of the screen and/or the instrument cluster (depending on version).

Press the back arrow to confirm.

Press "Animation".

Enable or disable: "Automatic text scrolling".

Select "Animated transitions".

Press the back arrow to confirm.

Select the language

Press Settings to display the main page.

Press "Configuration" to access the secondary page.

Select "Language" to change the language.

Press the back arrow to confirm.

Set time

Press Settings to display the main page.

Press "Configuration" to access the secondary page.

Press "Date and time".

Select "Time".

Press this key to set the time using the virtual keyboard.

Press "OK" to save the time.

Press this key to set the time zone.

Select the time display format (12h / 24h).

Enable or disable daylight saving time (+1 hour).

Enable or disable synchronisation with satellites (UTC).

Press the back arrow to save the settings.

The system does not automatically switch between daylight saving time and standard time (depending on country of sale).

Set date

Press Settings to display the main page.

Press "Configuration" to access the secondary page.

Press "Date and time".

Select "Date".

Press this key to set the date.

Press the back arrow to save the date.

Select the date display format.

Press the back arrow again to confirm.

Date and time settings are only available if "GPS Synchronisation" is turned off.