Trip computer

1. Press the MAIN button or press the MODE button repeatedly until the on-board computer display appears.

• The “Vehicle” tab: range, instantaneous consumption and distance remaining, or the Stop & Start timer.
• The “1” tab (trip 1) with: average speed, average consumption and distance travelled, calculated for trip “1”.
• The “2” tab (trip 2) with the same information for a second trip.

Each press of the button, located at the end of the wiper control stalk, successively displays the different on-board computer data, depending on the screen.

displays the number of kilometres that can be driven with the fuel remaining in the tank, based on the average consumption over the last kilometres driven.

This displayed value may vary considerably following a change in vehicle speed or the terrain of the route.

As soon as the range is less than 30 km, dashes are displayed.

After refuelling of at least 5 litres, the range is recalculated and displayed once it exceeds 100 km.

If dashes are displayed continuously while driving instead of figures, consult a CITROËN dealer.

calculated and displayed only from 30 km/h.

this is the average quantity of fuel consumed since the computer was last reset.

calculated from the last reset of the on-board computer.

calculated with reference to the final destination entered by the user. If guidance is active, the navigation system calculates it instantly.

this is the average speed calculated since the computer was last reset (ignition on).

(minutes / seconds or hours / minutes) If your vehicle is equipped with Stop & Start, a timer accumulates the time spent in STOP mode during the journey.

It resets each time the ignition is switched on with the key.