Control buttons

Press and hold button B (Fig. 24) to tilt the front glass panel into the "spoiler" position. Once in the "spoiler" position, press the button again and the roof will automatically move to the fully open position. To stop automatic control, press this button again.

In the fully open position, press button A (Fig. 24): the front glass panel will automatically move to the "spoiler" position. Press the button again and hold it for more than half a second: the roof will automatically move to the fully closed position. To stop the automatic movement and hold the panel in an intermediate position, press the button again.

Anti-trapping system: the sliding/tilting roof is equipped with an anti-trapping safety system which detects a possible obstacle during the closing movement, then stops and reverses the direction of the panel.

Configuration procedure

If the battery has been disconnected or a fuse has blown, the sliding/tilting roof operation must be reconfigured. Press button A (Fig. 24) in the closing direction and hold it for one second even after the roof has fully closed.