Front wipers/washers

Positions of the control, fig. 20:

wipers stopped.

intermittent operation.

continuous slow operation.

continuous fast operation.

When the lever is moved to position A, fig. 20, operation is limited to the time the lever is held in that position. When released, the lever returns to its normal position and the wipers stop automatically.

When the control is in the position
, the front wipers automatically adjust their speed to the vehicle speed.

When the front wipers are running, engaging reverse gear automatically starts the rear wiper.

"Intelligent wash" function: pulling the lever towards the steering wheel (unstable position) activates the front washers. Hold the lever pulled for more than half a second to automatically activate only one front wiper sweep and washer spray. The front wipers will make three sweeps after the lever is released. The cycle ends with one front wiper sweep after about 6 seconds.