Ford Focus Service Manual: Intake Manifold

Item	Part Number	Description
1	9288	Fuel supply tube
2	8K556	Coolant outlet
3	9D475	EGR valve
4	9E926	Throttle Body (TB)
5	6051	Cylinder head gasket
6	6010	Cylinder block
7	12A699	Knock Sensor (KS)
8	6754	Oil level indicator and tube
9	9424	Intake manifold
10	9439	Intake manifold gasket
11	6049	Cylinder head
12	9F593	Fuel injector (4 required)
13	9H487	Fuel rail

NOTICE: Do not loosen or remove the crankshaft pulley bolt without first installing the special tools as instructed in this procedure. The crankshaft pulley and the crankshaft timing sprocket are not keyed to the crankshaft. The crankshaft, the crankshaft sprocket and the pulley are fitted together by friction, using diamond washers between the flange faces on each part. For that reason, the crankshaft sprocket is also unfastened if the pulley bolt is loosened. Before any repair requiring loosening or removal of the crankshaft pulley bolt, the crankshaft and camshafts must be locked in place by the special service tools, otherwise severe engine damage can occur. NOTICE: During engine repair procedures, cleanliness is extremely important. All parts must be thoroughly cleaned and any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan, can cause engine failure. NOTE:

Assembly of the engine requires various inspections/measurements of the engine components (engine block, crankshaft, connecting rods, pistons and piston rings). These inspections/measurements will aid in determining if the engine components will require replacement. For additional information, refer to Section 303-00.

Intake Manifold

Test yourself