Comfort and Convenience Features

Using Cruise Control

~1min read
1. Нажмите кнопку CRUISE, которая расположена на рулевом колесе. При этом на

1. Press the CRUISE button located on the steering wheel. The CRUISE MAIN indicator will light up on the instrument panel.

You may leave the cruise control system switched on even when you are not using it.

2. Accelerate the vehicle to the desired speed (not less than 40 km/h) that you want to maintain.

3. Press and release the SET/DECEL button located on the steering wheel. The CRUISE CONTROL indicator will light up on the instrument panel, indicating that the cruise control system is activated.

Note that the actual vehicle speed may deviate slightly from the set speed, especially when driving on hilly terrain. When speed increases on downhill sections, use the brake pedal to correct the speed. This will cancel the cruise control mode. To restore the set speed, press the RES/ACCEL (RESUME/ACCELERATE) button. The CRUISE CONTROL indicator on the instrument panel will light up again.

For vehicles with a manual transmission: When the cruise control system is activated, the shift indicator for recommended shifts to the next higher or lower gear does not operate.

Test yourself

A quick Honda CR-V quiz: every answer comes with an explanation and a link to the manual page.