Emissions Testing

In this manual: Emissions Testing
Visual Index — 1Auto Idle Stop Function — 1Safe Driving — 1Instrument Panel — 1Controls — 1Features — 1Driving — 1Honda Sensing System — 1Maintenance — 1Handling the Unexpected — 1For Safe Driving — 1Seat Belts — 1Airbags — 1Child Safety — 1Exhaust Gas Hazard — 1Indicators — 1Gauges and Displays — 1Clock — 1Locking and Unlocking the Doors — 1Tailgate — 1Security System — 1Windows — 1Panoramic Roof — 1Operating the Switches Around the Steering Wheel — 1Mirrors — 1Seats — 1Interior Convenience Items — 1Climate Control System — 1Audio System — 1Audio System Basic Operation - Models with 7-in. Color Touchscreen — 1Audio System Basic Operation - Models with 9-in. Color Touchscreen — 1Customized Features - Models with 7-in. Color Touchscreen — 1Customized Features - Models with 9-in. Color Touchscreen — 1HomeLink Universal Transceiver — 1Bluetooth HandsFreeLink - Models with 7-in. Color Touchscreen — 1Bluetooth HandsFreeLink - Models with 9-in. Color Touchscreen — 1Refuel Recommend — 1Before Driving — 1Towing a Trailer — 1Off-Highway Driving Guidelines — 1When Driving — 1Honda Sensing — 1Braking — 1Parking Your Vehicle — 1Multi-View Rear Camera — 1Surround View Camera System — 1Refueling — 1Fuel Economy and CO2 Emissions — 1Before Performing Maintenance — 1Maintenance Minder — 1Maintenance Under the Hood — 1Replacing Light Bulbs — 1Checking and Maintaining Wiper Blades — 1Battery — 1Remote Transmitter Care — 1Climate Control System Maintenance — 1Cleaning — 1Accessories and Modifications — 1Tools — 1Engine Does Not Start — 1If the Battery Is Dead — 1Overheating — 1Indicator Coming On/Blinking — 1Fuses — 1Emergency Towing — 1Refueling — 1Specifications — 1Identification Numbers — 1Emissions Testing — 1
2steps
~12min
1/5difficulty
Done 0 of 2

Testing of Readiness Codes

Your 2023 Honda Pilot has readiness codes as part of its onboard self-diagnostic system. These codes are used by some states to verify whether your vehicle's emissions components are functioning properly.

Important Note: The readiness codes may not be read correctly if the test is performed right after the battery has died or been disconnected.

How to Check Readiness Codes:

  1. Set the power mode to ON without starting the engine.
  2. Observe the malfunction indicator lamp (MIL):

    - If the MIL comes on for several seconds and then goes off, the readiness codes are set.
    - If the MIL blinks five times, the readiness codes are not set.

Ensuring the readiness codes are set can help avoid issues during emissions testing.

If you are required to have your vehicle tested before the readiness codes are ready, prepare the vehicle for retesting by doing the following:

1. Fill the gas tank to approximately 3/4 full.

2. Park the vehicle and leave the engine off for 6 hours or more.

3. Make sure the ambient temperature is between 40ºF and 95ºF (4ºC and 35ºC).

4. Start the engine without touching the accelerator pedal, and let it idle for 20 seconds.

5. Keep the vehicle in (P). Increase the engine speed to 2,000 rpm, and hold it there for about 3 minutes.

6. Let the engine idle with your foot off the accelerator for 20 seconds.

7. Select a nearby, lightly traveled major highway where you can maintain a speed of 50 to 97 km/h for at least 20 minutes. Drive on the highway in (D). Do not use cruise control. When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.) If you cannot do this for a continuous 90 seconds because of traffic conditions, drive for at least 30 seconds, then repeat it two more times (for a total of 90 seconds).

8. Drive in city or suburban traffic for at least 10 minutes. When traffic conditions allow, let the vehicle coast for several seconds without using the accelerator pedal or the brake pedal.

9. Park the vehicle and leave the engine off for 30 minutes.

The readiness codes are erased when the battery is disconnected, and set again only after several days of driving under a variety of conditions.

If a testing facility determines that the readiness codes are not set, you may be requested to return at a later date to complete the test.

If the testing facility determines the readiness codes are still not set, see a dealer.