HomeLink Universal Transceiver

In this manual: HomeLink Universal Transceiver
Visual Index — 1Auto Idle Stop Function — 1Safe Driving — 1Instrument Panel — 1Controls — 1Features — 1Driving — 1Honda Sensing System — 1Maintenance — 1Handling the Unexpected — 1For Safe Driving — 1Seat Belts — 1Airbags — 1Child Safety — 1Exhaust Gas Hazard — 1Indicators — 1Gauges and Displays — 1Clock — 1Locking and Unlocking the Doors — 1Tailgate — 1Security System — 1Windows — 1Panoramic Roof — 1Operating the Switches Around the Steering Wheel — 1Mirrors — 1Seats — 1Interior Convenience Items — 1Climate Control System — 1Audio System — 1Audio System Basic Operation - Models with 7-in. Color Touchscreen — 1Audio System Basic Operation - Models with 9-in. Color Touchscreen — 1Customized Features - Models with 7-in. Color Touchscreen — 1Customized Features - Models with 9-in. Color Touchscreen — 1HomeLink Universal Transceiver — 1Bluetooth HandsFreeLink - Models with 7-in. Color Touchscreen — 1Bluetooth HandsFreeLink - Models with 9-in. Color Touchscreen — 1Refuel Recommend — 1Before Driving — 1Towing a Trailer — 1Off-Highway Driving Guidelines — 1When Driving — 1Honda Sensing — 1Braking — 1Parking Your Vehicle — 1Multi-View Rear Camera — 1Surround View Camera System — 1Refueling — 1Fuel Economy and CO2 Emissions — 1Before Performing Maintenance — 1Maintenance Minder — 1Maintenance Under the Hood — 1Replacing Light Bulbs — 1Checking and Maintaining Wiper Blades — 1Battery — 1Remote Transmitter Care — 1Climate Control System Maintenance — 1Cleaning — 1Accessories and Modifications — 1Tools — 1Engine Does Not Start — 1If the Battery Is Dead — 1Overheating — 1Indicator Coming On/Blinking — 1Fuses — 1Emergency Towing — 1Refueling — 1Specifications — 1Identification Numbers — 1Emissions Testing — 1
~3min read
1special tools

The HomeLink Universal Transceiver can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.

■ Important Safety Precautions

Refer to the safety information that came with your garage door opener to test that the safety features are functioning properly. If you do not have the safety information, contact the manufacturer.

Before programming HomeLink, make sure that people and objects are out of the way of the garage or gate to prevent potential injury or damage.

When programming a garage door opener, park just outside the garage door's path.

Before programming HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an "electronic eye," or other safety and reverse stop features. If it does not, HomeLink may not be able to operate it.

NOTE:

Some LED lightbulbs installed in the garage door opener can interfere with the training and consistent operation of your HomeLink device. Please consider use of Low RF interference bulbs in your garage door opener.

HomeLink will not operate when the vehicle security is set or about 30 minutes after the power mode is set to VEHICLE OFF. If HomeLink indicator (LED) does not show when a button is pressed, ensure doors are unlocked or the power mode is set to ACCESSORY or ON to return HomeLink to operation.

Training HomeLink

If it is necessary to erase a previously entered learned code:

  • Press and hold the I and III HomeLink buttons for about 10 seconds, until the green indicator blinks. Release the buttons, and proceed to step 1.
  • If you are training the second or third button, go directly to step 1.
HomeLink Universal Transceiver - 2023-2024 Honda Pilot

The instructions on the next page should work for most gate or garage openers, but may not work for all. For detailed instructions about your specific remote opener, visit http://www.homelink.com or call (800) 355-3515.

Reprogramming a Button

If you want to retrain a programmed button for a new device, you do not have to erase all button memory. You can replace the existing memory code using this procedure:

1. Press and hold the desired HomeLink button until the HomeLink indicator begins to slowly flash orange. This should take about 20 seconds.

↓

2. Release the HomeLink button and position the remote transmitter you wish to link 1 - 3 inches (3 - 8 cm) from the HomeLink button you want to program, then follow steps 3 - 6 under "programming a button."

Erasing Button Memory

To erase programming from the buttons, press and hold the two outside HomeLink buttons until the HomeLink indicator changes from orange to rapidly flashing green.

This should take about 10 seconds. You should erase all programming before selling the vehicle.

Operating

To operate, simply press and release the programmed HomeLink button. Activation will now occur for the trained device.

Questions

For questions or comments, visit www.HomeLink.com, www.youtube.com/ HomeLinkGentex, or by calling the HomeLink Hotline (North America only) at (800) 355-3515.

HomeLink is a registered trademark of Gentex Corporation.