Hyundai Elantra CN7 Quiz

Camshaft - Disassembly

In this manual: Camshaft - Disassembly
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read


CAMSHAFT - COMPONENTS

1. Disconnect the PCV hose and the PCV valve hose.

2. Снимите шкив насоса охлаждающей жидкости и шкив коленчатого вала.

2. Remove the water pump pulley and the crankshaft pulley.

3. Remove the timing belt cover.

4. Loosen the timing belt tensioner pulley bolts, release the belt tension, and temporarily secure the tensioner pulley.

5. Remove the timing belt from the camshaft sprocket.

6. Remove the bolts securing the center cover, then remove the cover.

7. Remove the ignition coil assembly.

8. Отверните болты крепления крышки головки цилиндров и затем снимите крышку.

8. Remove the bolts securing the cylinder head cover, then remove the cover.

9. Remove the camshaft sprocket.

10. Снимите крышки подшипников распределительного вала и цепь привода ГРМ.

10. Remove the camshaft bearing caps and the timing chain.

11. Remove the camshaft.

12. Remove the hydraulic lash adjusters.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.